This module takes two voltage inputs and performs either XOR, AND, Summing or Difference operations on the voltages to create an output voltage. This is useful for low frequency waveshaping or altering a sequencer's output temporarily without altering the actual sequence.
An expander is available which takes the 10 bits of the output voltage and gives each bit it's own output. This is useful for turning voltages into ryhtms.
The main PCB has PC mounted pots for convenience as well as mounting holes for flexibility. There are footprints for Eurorack and MOTM style power connecters. The Expander is Eurorack only, all components for the expander are directly soldered to the PCB, so there is no wiring.
There are 2 Youtube demos for this module:
For complete information on this module and some mp3 demos, download this PDF file.
Here is a link to a youtube demo for this module.
PCBs and PICs for the main board are for sale for $18 each.
Expander PCBs are for sale for $7each
Unfinished panels are for sale for $8 each for either the main or expander. Please read this page on unfinished panels before ordering.
If you'd like to drill your own panel, here is the drill guide that I use to make the main panels. And here is the drill guide I use for the expander It should be printed at 300dpi.